14
Setup Steps
Vacation & Away Settings
The Vacation feature allows the thermostat to use temporary,
energy saving setpoints without having to change regular programming.
The HOME/AWAY feature allows for a one button press to bring
in your stored unoccupied vacation settings. A subsequent press
of the HOME/AWAY button restores the last used comfort settings.
Press the
VACATION
button to enter Vacation/Away programming.
Use the WARMER and COOLER buttons to choose the number of days desired to run the in
Vacation/Away settings.
To confirm your settings and advance to the next step, press the
MODE
button again. Choose the
desired Vacation/Away Mode. Press the
MODE
again to adjust the ‘unoccupied’ setpoint. If you
selected auto changeover mode for unoccupied/vacation settings, then pressing
MODE
again will
allow the adjusting of the 2nd setpoint. Otherwise press
MODE
to confirm and return to normal
operation.
Press the
VACATION
button again to return to the main screen. Both
VACATION
and AWAY
use these same settings.
VACATION
button use specifies a duration of days for these settings,
whereas Away maintains these settings until the
HOME/AWAY
button is pressed again.
When the
VACATION
button is pressed and the thermostat detects that a Wi-Fi module is
installed:
During Non-Vacation Periods: the scrolling display will read:
“Use Skyport to View/Edit Settings”.
During Vacation Period: the scrolling display will read:
“To cancel VACATION press MODE button”.
NOTE:
If the HOME/AWAY button is pressed during an active VACATION period, the scrolling
display will read: “To cancel VACATION press MODE button.
The thermostat must be running in Program On for
VACATION
to have any effect. After you alter
any settings, they will take effect until midnight on that day. The thermostat does not need to be
running in Program On for the
HOME/AWAY
button to have effect.
VACATION
HOME/
AWAY
Press the SETUP button, then press MODE repeatedly until the
desired setup step appears. Use the WARMER or COOLER buttons
to make selection. Press MODE to advance to the next step.
Press/hold MODE to go backwards to prior steps. Press SETUP to
leave the setup screens.
WARMER
COOLER
MODE
SETUP