30
Setup Steps
Auxiliary Output
The auxiliary output will become active whenever Air Patrol senses that the air quality
has fallen to the level you specify in step #80.
Skyport*
(Setup Step 82)
Set to ON to allow access to Skyport services or to OFF to not allow access to Skyport
services.
(Wi-Fi accessory is required)
Visit venstar.com for more information.
Local API*
(Setup Step 83)
Set to ON to allow third-party software to interface with your thermostat. Typically used
with home automation set-ups.
(Wi-Fi accessory is required)
Show Clock
(Setup Step 84)
Select ON or OFF to have the time of day appear on the screen
Press Fan To Clear All Messages
(Setup Step 85)
This feature allows the user to clear all current error messages from the display.
Press the SETUP button, then press MODE repeatedly until the
desired setup step appears. Use the WARMER or COOLER buttons
to make selection. Press MODE to advance to the next step.
Press/hold MODE to go backwards to prior steps. Press SETUP to
leave the setup screens.
WARMER
COOLER
MODE
SETUP
