19
User Setup
Holiday
The Holiday feature allows the thermostat to use temporary,
energy saving settings without having to change regular
programming.
Holiday setup/programming at the local thermostat is limited to the number
of days employing Holiday settings. When the optional Wi-Fi module is
detected in the thermostat, local Holiday programming at the thermostat of
the Holiday setup is not allowed. In this case Holiday setup and programming
is accomplished with the Skyport Web App. Skyport gives the user extensive
control over Holiday settings.
Press the HOLIDAY button to enter Holiday programming.
(no Wi-Fi Module detected).
If there is not a Holiday period active:
Use the WARMER and COOLER buttons to choose the number of days
desired to run the Holiday feature. To confirm your setting press the
HOLIDAY button again.
When the thermostat is programmed for Holiday operation, and the
thermostat is in the Program On mode (running an Occupied/Unoccupied
time period schedule), Holiday settings will take effect at 12:00AM of the
next day. The thermostat will use the unoccupied mode and setpoints (see
page 26) during the holidays.
If the Holiday button is pressed during an active Holiday period:
The active Holiday period may be cancelled by pressing the Mode button.
Emergency Heat
The Emergency Heat function is only available if your
thermostat is set to control a Heat Pump.
To initiate the Emergency Heat feature, Press the EMERGENCY button. During
Emergency Heat operation the thermostat will turn on the fan and auxiliary
stages of heat when there is a demand for heat. The 1st stage of heating and
all stages of cooling will be unavailable. To exit Emergency Heat, press the
EMERGENCY button.
HOLIDAY
EMERGENCY
HEAT
