20
User Setup
The Accessory Status button allows the user to view the status of wired and
wireless accessories. For many of the wireless devices this status includes:
Battery Level, Signal Strength & Last Time Updated.
If there is an optional wireless module installed, the Accessory Setup button
allows the user to link or connect wireless devices to the thermostat, or the
thermostat to the network.
Voyager theremostats may use 1 of 4 different types of modules. They are:
1. Wi-Fi Module
2. Z-Wave Module
3. ZigBee Module
4. Venstar RF Module
VENSTAR RF Module
Please follow the instructions included with the wireless accessory to start
the linking process. The general instructions are below.
Press the Accessory Setup button to enter the linking/un-linking mode.
Press the Mode button to initiate the linking or un-linking process.
At any time press the Accessory Setup button to return to the main screen.
NOTE: A wired outdoor sensor is updated every 1 minute, a wireless outdoor
sensor is updated every 5 minutes to conserve battery life.
Wireless Module
Wireless Module
ACCESSORY
STATUS
ACCESSORY
SETUP
