11
Control via Bluetooth
If compatible, the unit can be controlled via the Bluetooth linked App. This is only available on units
the
X
designation.
Download the Vent-Axia iOS or Android App and follow the pairing instruction in the App to connect to your
device.
The App allows the user to set all of the units parameters and monitor the status of the unit. It also
supports updating of the units firmware should new features become available. .
SERVICING & MAINTENANCE
WARNING: THE FAN AND ANCILLARY CONTROL EQUIPMENT MUST BE
ISOLATED FROM THE POWER SUPPLY DURING MAINTENANCE.
1.
At intervals appropriate to the installation, the fan should be inspected and cleaned to ensure there is
no significant buildup of dirt or other deposits.
2.
To inspect the inside of the product isolate the power, use a coin or similar to depress the cover
retention clips.
3.
Remove the cover; remove the scroll assembly by unscrewing the two screws and unclipping the
clips in the two corners and pulling away. If necessary, vacuum the inside of the Sentinel Multivent.
4.
The fan has sealed for life bearings, which do not require lubrication. Expected service life is at least
45,000 hours continuous running.
5.
Check all fixings are tight and secure
FAULT CODES
If the MEV unit detects a fault it will display an error message on the HMI display:
Fault Code
Description
F01
Control fault
– Unit failed startup check
F02
Motor Fault
– No RPM
F03
Humidity/Temp sensor Fault
– No value
F04
Co2 sensor Fault
– No value
