Before commissioning
Remove the filter elements from the device, remove the protective covers and re insert
them back into the device. Follow the steps in the section "Filter change". The main
filter should normally be changed every 6-9 months depending on the enviroment.
The order of the filters is marked with the numbers 1-3 on the filter flaps, the filter
marked 1 should be located nearest to the outside of the unit.
For replacement filters Either scan the QR code on the front page or go online
https://www.vent-axia.com/pureairroom and Order:- PureAir Room 260 & 260x
Replacement filter Stock Ref No:-496613
Commissioning
1.
Connecting the unit to the power supply.
When you first plug in the air purifier, the unit will make a sound.
Caution: Never insert or remove the plug with wet hands.
2.
POWER
The power button is used to turn the unit on and off.
3.
AUTO
If you use the unit in automatic mode, the fan is controlled via the air quality sensor. In
addition, the current air quality is shown on the display as follows:-
Air Quality
PM2.5
(µg/m3)
Display Fan
Stage
Good 10-60
Lights
up
Green
1
Needs Improving
61-150
Glows Orange
2
Bad 151-300
Glows
Red
3
4.
Timer
With the timer you can set the running time of the device.
You can select between 1 and 8 hours.
5.
ION/UV
Press button to turn on/off the ION function as well as
sterilization when the unit is in Normal or Auto mode.
6
F Renew
Press the “ION” and “Timer” button and the display will show the cumulated
purify time ;If you press and hold both buttons for 3 seconds, the cumulated
purify time will restart from "0" .
