Filter change
Insert the replacement filter / Front panel assembly
1
Please make sure the correct sequence i s u s e d when inserting the new filters.
2
Insert the new filter
(Prefilter,HEPA,Active
Carbon,Cold catalyst) placing
the top part in first and push
slightly up and in as shown in
diagram.
3
Position the back panel on
the fixings in the main frame.
Press the back cover slightly
inwards so that the cover
snaps
into
place. see
diagram.
Make sure the back cover is
tightly closed.
Filter replacement
1
Please ensure the product is switched-off and unplugged before
opening up the unit for filter replacement.
2
Hold the unit and remove the
back panel as shown
(Magnetic fastening).
3
Pull the middle textile strap
outwards to carefully pullout the
filter (Prefilter / HEPA-filter/Active-
carbon-filter/cold-catalyst-filter).
Pull the textile strap in the middle of the
combination filter