7
INSTALLING THE CONTROLLER
1.
Insert a small flat bladed screwdriver into the small slot at the base of the controller, push the release
catch in and gently lever upwards to remove the front cover of the controller by pulling the cover away
from the back box.
2.
Fix the back box in the position required using the 2 key hole slots the countersink at the top of the slots
provides permanent fixing.
Fixing Slots.
CONTROLLER
1.
The 4 core SELV cable is wired
to the controller terminals in the
following order:
2.
Replace the Controller’s front
cover.
F.
WIRING.
WARNING: THE FAN AND ANCILLARY CONTROL EQUIPMENT MUST BE ISOLATED
FROM THE POWER SUPPLY DURING THE INSTALLATION / OR MAINTENANCE.
Unscrew the three retaining screws and
remove the Electrical Control Box Cover.
JP 200
CON 7
BOOST
HRU Control Panel
A B C D
A B C D
L.C.D Controller
BLUE / WHITE
ORANGE / WHITE
WHITE / ORANGE
WHITE / BLUE
