IMPORTANT SAFETY INFORMATION
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE
COMMENCING INSTALLATION.
1. Do not install this product in areas where the following may be present or
occur:
• Excessive oil or a grease laden atmosphere.
• Corrosive or flammable gases, liquids or vapours.
• Subject to direct water spray from hoses.
• Ambient temperatures higher than 40°C and lower than -20°C.
• Possible obstructions that may hinder access to or removal of the unit.
2. All wiring must be in accordance with the current IEE wiring regulations
BS7671, or appropriate standards of your country. Installation should be
inspected and tested by a suitably qualified person after completion.
3. Ensure the mains supply (voltage, frequency and phase) complies with the
rating label.
4. The unit should be provided with a local double pole fused spur fitted with a
3A fuse having a contact separation of at least 3mm.
5. These units must be earthed.
6. Precautions must be taken to avoid the back-flow of gases into the building
from the open flue of gas or other fuel-burning appliances.
7. This appliance is not suitable for installation in a shower cubicle or
enclosure and must be sited away from any sorce of water spray.
8. This appliance must be sited out of reach of a person using a fixed bath or
shower.
9. Do not connect a lamp across the supply to the appliance. Faulty operation
of the lamp will occur and the appliance will fail.
