ACCESS AREA DIMENSIONS & WEIGHTS
DIMENSIONS
KINETIC
KINETIC F
KINETIC PLUS
KINETIC HIGH FLOW
A (mm)
300
360
540
540
B (mm)
560
560
780
780
WEIGHT (kg)
15
19
24
38
The wall should have sufficient strength to support the unit.
Take into consideration the position of the electrical
services and the condensate drain.
Ensure there is adequate access for installation, operation
and maintenance.
The unit MUST always be mounted vertically with ducting
exiting vertically or horizontally.
Do not use this unit as a support for any other equipment
.
Wall Mounting
1.
Refit the front and rear covers if they have been removed.
2.
Ensure the two steel wall bushes are fitted to the rear cover, along the top row of screws.
3.
Mark the condensate and wall bracket positions.
4.
Fit the stand-off feet in place, supplied in the accessory bag
5.
Fit metal wall bracket (supplied) to the wall using appropriate fixings.
6.
Lift unit and locate the steel wall bushes onto the wall bracket. The unit should now be physically
installed in its intended operating location.
7.
Ensure that the condensate drain is connected.
INFORMATION FOR THE INSTALLER
