Commissioning
Kinetic MVHR Installation & Commissioning
21
Button Operation
Notes:
The LED in the centre of the label lights after 6 months to indicate that the filters should be checked and
cleaned / changed if necessary. See Maintenance section.
Button
Function
Press once to activate Boost mode.
Press once again to exit Boost mode.
To activate Summer Mode press 3 times in less than three seconds, after a short pause the
green LED will illuminate and the supply fan will stop.
To exit Summer Mode press 3 times in less than three seconds, after a short pause the green
LED will turn off and the supply fan will restart.
Press and hold for more than 10 seconds to reset after cleaning or replacing filter to reset Check
Filter LED.
