13
E. SERVICING AND MAINTENANCE.
WARNING: THE POSITIVE VENTILATIION UNIT AND ANCILLARY CONTROL EQUIPMENT
MUST BE ISOLATED FROM THE POWER SUPPLY DURING THE INSTALLATION / OR
MAINTENANCE.
The fan motor uses sealed ball bearings, and does not require further lubrication.
Apart from filter change the Lo-Carbon PoziDry Pro contains no user serviceable parts.
Filter:
Under normal conditions; i.e. away from main roads and industrial areas, it is recommended that the filter is
checked annually and cleaned or replaced as necessary. Otherwise change as required. (See Spares part list
below)
The filter may be gently cleaned with a vacuum cleaner or washed in a soapy water solution and allowed to air dry
before re-fitting. Do not dry the filter in a tumble dryer.
When re-fitting make sure that the filter is fitted correctly. This will ensure that all the fresh air entering the
dwelling has passed through the filter first.
Below is a list of spares and accessories available for the Pozidry Pro:
Spares and Accessories
Part Number
F7 FILTER PACK
477957
1X REPLACEMENT MOUTNING LEG & FOOT
477627
HANGING KIT
477628
REPLACEMENT G4 FILTER PACK
477629
PIV TWIN SPIGOT KIT
449071
200mm DIAMETER 2m FLEXIBLE DUCTING
477748
REPLACEMENT DIFFUSER
477889
REPLACEMENT DIFFUSER FOR FD MODEL
475664
REPLACEMENT MOUNTING FOOT
478000
DIFFUSER ASSEMBY
478228
PURGE BOOST SWITCH LINK CONNECTOR
411150
