background image

 

2

[A]

[B]

[D]

[C]

[E]

Window 

Kit

[G]

[F]

[F]

Wall Kit

 
 

Installation and Wiring Instructions for the LoWatt Utility and Kitchen Extract Fan. 

 
 

     IMPORTANT: 
     READ THESE INSTRUCTIONS BEFORE COMMENCING THE INSTALLATION 

 
DO NOT install this product in areas where the following may be present or occur: 

  Excessive oil or a grease laden atmosphere. 

  Corrosive or flammable gases, liquids or vapours. 

• 

Ambient temperatures higher than 40°C or less than –5°C. 

• 

Possible obstructions which would hinder the access or removal of the Fan. 

  Sudden ductwork bends or transformations close to the Fan. 

 

SAFETY AND GUIDANCE NOTES 

 

A. 

All wiring to be in accordance with the current I.E.E. Regulations, or the appropriate standards of your country 
and 

MUST 

be installed by a suitably qualified person. 

B. 

The Fan should be provided with a local double pole isolator switch having a contact separation of at least 3mm. 

C. 

Ensure that the mains supply (Voltage, Frequency, and Phase) complies with the rating label. 

D. 

The Fan should only be used in conjunction with the appropriate Vent-Axia products. 

E. 

It is recommended that the connection to the fan connecter terminals is made with flexible cable. 

F. 

When the Fan is used to remove air from a room containing a fuel-burning appliance, ensure that the air 
replacement is adequate for both the fan and the fuel-burning appliance. 

G. 

The Fan should not be used where it is liable to be subject to direct water spray for prolonged periods of time. 

H. 

Where ducted Fans are used to handle moisture-laden air, a condensation trap should be fitted. Horizontal 
ducts should be arranged to slope slightly downwards away from the Fan. 

I. 

This appliance is not intended for use by young children or infirm persons without supervision. 

J. 

Young children should be supervised to ensure that they do not play with the appliance. 

 

DESCRIPTION 
 

The LoWatt Utility/Kitchen Fan is suitable for Panel mounting either in a horizontal or vertical plane as standard; 
both Window (14 09 01) and Wall (14 09 02 White / 14 09 03 Brown) Kits are available to suit these options.  
 
 

[A] Indoor 

Grille. 

[B] Inner 

Cover. 

[C] Cable 

Grommet. 

[D] Base 

Housing. 

[E] Telescopic 

Wall 

Liner. 

[F] Outside 

Grille. 

[G] Spacers. 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Reviews: