Start Up
Sentinel Kinetic MVHR Installation & Commissioning
27
Low Airflow Screen
Low Airflow mode is activated when the Normal Airflow
is set to
Off
, (see page 31 for set up details).
The Normal Airflow mode can be set to run during the
daytime i.e. from 6am to 11pm, the Low Airflow mode
will then run during the night from 11pm to 6pm.
Low Airflow
20 %
Set Clock Screen
From the Normal Airflow screen, simply press the
button once to access the Set Clock screen.
The Set Clock Control screen enables you to change
the clock settings. The clock retains its settings for
approximately two weeks without mains power, after
which it will need resetting when power is reconnected
Values are
DDD
HH:MM
.
Return to the normal display by pressing the
button
or leave to timeout and return automatically after 2
minutes.
The unit will not automatically switch for daylight saving
time.
Set Clock
Mon 12:30
Summer Mode Screen
From the Normal Airflow screen, simply press the
button twice to access the Summer Mode screen.
If the unit is a summer bypass model, the Summer
Mode screen enables you to switch the summer
bypass control on or off. This screen is only displayed
when the bypass is fitted.
Options available are
On
(default) and
Off.
Return to the normal display by pressing the
button
or leave to timeout and return automatically after 2
minutes.
Summer Mode
On
Indoor Temp Screen
From the Normal Airflow screen, simply press the
button three times to access the Indoor Temp screen.
The Indoor Temp screen enables you to choose the
target room temperature in degrees Centigrade – only
displayed when the bypass is fitted.
Selectable range is
16-30
(
21
default).
Return to the normal display by pressing the
button
or leave to timeout and return automatically after 2
minutes.
This function will only work when the Summer Mode is
set to on.
Indoor Temp
21 C
Summary of Contents for Sentinel Kinetic B 438222
Page 47: ......
