background image

Technical Specification 

Sentinel Kinetic MVHR User Instructions 

3

 

Product Description 

Sentinel Kinetic Sentinel Kinetic F Sentinel Kinetic Plus & Sentinel Kinetic High Flow 

The Vent-Axia

 Sentinel Kinetic, Sentinel Kinetic F, Sentinel Kinetic Plus & Sentinel Kinetic High Flow 

Mechanical Ventilation/Heat Recovery (MVHR)

 are heat recovery units designed for the energy efficient 

ventilation of houses and similar dwellings, conforming to the latest requirements of the Building Regulations 
document F 2010.  

The units are designed for continuous 24 hour exhaust ventilation of stale moist air from bathrooms, toilets and 
kitchens. As the stale air is extracted, a heat exchanger within the unit transfers up to 90% of the heat into the 
supply air entering the bedrooms and lounge.  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 
 
 
 
 
 
 

Fig 3: Sentinel Kinetic Left handed 

Fig 1: Sentinel Kinetic Right handed 

Fig 2: Sentinel Kinetic F, Sentinel Kinetic Plus and High Flow 
Right handed  

Fig 4: Sentinel Kinetic F, Sentinel Kinetic Plus and High Flow Left 
handed  

Summary of Contents for sentinel Kinetic MVHR series





















Reviews: