background image

 

         

EILING 
INSTA 

 

 

 

 

 

MAINTENANCE CAUTIONS 

 

 

WARNING 

BEFORE REPAIRING THE HEATER, MAKE SURE YOU HAVE TURNED OFF THE MAIN ELECTRICITY SUPPLY. 

 

 
Caution: 

When the appliance is not operated for a long period of time, cleaning or maintenance is conducted or when 
the location of the heater is changed, the heater should be turned to OFF and disconnect  from the electrical 
supply.  Periodic inspection and removal of dirt and contaminants will ensure that equipment can be 
operated safely.    
       

 

1.  Make sure the heater is always switched off before cleaning. 

2.  Check the Reflector and IR-Filament for dirt, dust or contaminants at least once a month. If 

necessary, apply cleaning and maintenance process. 

3.  The number of checks may be increased considering the amount of the dust in the environment. 

4.  Check the deformation of the Reflector, Wire and Frame visually while cleaning the appliance. In 

case of deformation, consult your technical service. 

5.  Check the Power Cord and installation visually while cleaning the appliance. In case of deformation, 

consult your technical service. 

6.  Never install the heater under extreme hot environments. 

WALL / CEILING INSTALLATION 

Summary of Contents for SUNB3000BL









Reviews: