background image

Head Office: Fleming Way, Crawley, West Sussex, RH10 9YX. Tel: 01293 526062 Fax: 01293 551188

UK NATIONAL CALL CENTRE,  Newton Road, Crawley, West Sussex, RH10 9JA

SALES ENQUIRIES:      Tel: 0844 8560590    Fax: 01293 565169

TECHNICAL SUPPORT:  Tel: 0844 8560594    Fax: 01293 532814

Web:-www.vent-axia.com

Email:-

info@vent-axia.com

As part of the policy of continuous product improvement Vent-Axia reserves the right to alter specifications without notice.

448500A

1111

The

Guarantee

Applicable only to products installed and used in the United Kingdom.  For details of guarantee outside the United Kingdom 

contact your local supplier.

Vent-Axia guarantees its products for two years from date of purchase against faulty material or workmanship.  In the event of 

any part being found to be defective, the product will be repaired, or at the Company’s option replaced, without charge, provided 

that the product:-

Has been installed and used in accordance with the instructions given with each unit.

Has not been connected to an unsuitable electricity supply. (The correct electricity supply voltage is shown on the 
product rating label attached to the unit).

Has not been subjected to misuse, neglect or damage.

Has not been modified or repaired by any person not authorised by the company.

IF CLAIMING UNDER TERMS OF GUARANTEE

Please return the complete product, carriage paid to your original supplier or nearest Vent-Axia Centre, by post or personal visit.  

Please ensure that it is adequately packed and accompanied by a letter clearly marked “Guarantee Claim” stating the nature of 

the fault and providing evidence of date and source of purchase.

The guarantee is offered to you as an extra benefit, and does not effect your legal rights

Summary of Contents for VAAR1000

















Reviews: