5
EN
SAFETY PRECAUTIONS
FOR INSTALLATION / WARNING
∙
Plug the power cord into a wall socket with the power specifications of the product
or higher and use the socket for this appliance only. In addition, do not use an
extension cord.
➔
Sharing a wall socket with other appliances using a multi outlet power strip or
extending the power cord may result in electric shock or fire.
➔
Do not use an electric transformer. It may result in electric shock or fire.
➔
If the voltage/frequency/rated current condition is different, it may cause electric
shock or fire.
FOR INSTALLATION / WARNING
∙
Do not install this appliance near a heater, inflammable material. Do not install this
appliance in a humid, oily or dusty location, in a location exposed to direct sunlight
and water (rain drops). Do not install this appliance in a location where gas may leak.
➔
Failure to do so may result in electric shock or fire.
FOR INSTALLATION / CAUTION
∙
The appliance should be installed in a place where the power cord of the product
can be easily pulled out.
➔
Failure to do so may result in electric shock or fire due to electric leakage.
∙
Install your appliance on a level and hard floor that can support its weight.
➔
Failure to do so may result in abnormal vibrations, noise, or problems with the
product.
∙
There should be over 6 in. space around the appliance.
➔
If space for air intake is not enough, humidification and purification capacity may
decrease.
➔
If the appliance is too near wall side, the wall paper may get damaged.
∙
When installing the product, make sure that no heavy objects are on the power cord.
➔
Failure to do so may result in electric shock or fire.
FOR POWER CORD / WARNING
∙
Unplug the product, and then remove foreign substances (dust, moisture, etc.)
of the power plug terminal or power plug connection part with a dry cloth on a
regular basis.
➔
Otherwise, electric shock or fire may occur.
∙
When the product, power plug or power cord is damaged, contact your nearest
service center.
∙
Plug the power plug into the wall
socket firmly. Do not use a damaged power plug, damaged power cord or loose
wall socket.
➔
Failure to do so may result in electric shock or fire.
∙
When unplugging the product, do not pull the power cord. Grip the power plug, and
then pull the power plug.
➔
Otherwise, electric shock or fire may occur.
∙
Do not pull or excessively bend the power cord. Do not twist or tie the power cord.
∙
Do not hook the power line over a metal object, place a heavy object on the power
cord, insert the power line between objects, or push the power cord into the space
behind the appliance.