VentAHood V-Line K250 How To Clean Download

Page: 5 / 6

Step 4. Remove the blower wheel.

Once the set screw is loosened, pull the blower wheel downward slightly, then gently remove

the blower wheel from shaft. Use caution to avoid bending or distorting the blower wheel

and take care not to move or lose the metal balancing clips that may be affixed to the blower

wheel. If the blower wheel is difficult to remove, the area where the motor shaft makes

contact with the blower wheel hub may need to be sprayed with a common penetrating oil

such as WD-40

and allowed to soak for a short time.

Summary of Contents for V-Line K250

Page 1: ...V Line Blower How to Clean For models starting with K250 ...

Page 2: ...Step 1 Release the blower pan Be sure the motor is turned off before proceeding The blower pan is easily removed for cleaning by unsnapping the suitcase latches one on each side of the blower assembly ...

Page 3: ...Step 2 Remove the blower pan With the blower pan latches released remove the blower pan by pulling the pan downward Be careful to keep the tray level if the hood has been recently used ...

Page 5: ...o avoid bending or distorting the blower wheel and take care not to move or lose the metal balancing clips that may be affixed to the blower wheel If the blower wheel is difficult to remove the area where the motor shaft makes contact with the blower wheel hub may need to be sprayed with a common penetrating oil such as WD 40 and allowed to soak for a short time ...