Fg
UP TO 20KG
BEFORE INSTALLATION
MOUNTING BRACKET
• The ceiling fan must be installed in a location so that the blades have a minimum 300mm spacing
from the tip of the blade to the nearest objects or walls.
• Secure the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at least
20kg, with the two Fixing screws provided. Ensure at least 30mm of the screw is threaded into the
support structure.
QUICK ‘CLICK’ BLADE INSTALLATION
BLADE ATTACHMENT
1. Insert the blades (x3) into the blade holding slots on the motor housing.
2. Insert the 2 safety screws ,being careful not to over-tighten
3. Move motor housing canopy downward until covering the motor housing.
4
PLEASE NOTE:
The bracket fixing screws provided are for use with the wooden structures only. These screws are
designed specifically for this purpose, and use of other types of screws, ie: Bugle headed screws may
void the warranty.
For structures other than wood, the appropriate screw type MUST be used.
