background image

 

 

THANK YOU FOR PURCHASING 

 

Thank you for purchasing this quality Ventair ceiling fan. To ensure correct function and safety, please 

read all instructions before using the product and keep all instructions for future reference.   

 

SAFETY PRECAUTIONS 

 

1.  The appliance is not intended for use by persons (including children) with reduced physical, sensory 

or  mental  capabilities,  or  lack  of  experience  and  knowledge,  unless  they  have  been  given 

supervision  or  instruction  concerning  the  use  of  the  appliance  by  a  person  responsible  for  their 

safety.   

2.  Children should be supervised to ensure that they do not play with the appliance. 

3.  An all-pole disconnection switch must be incorporated into the fixed wiring, in accordance with local 

wiring rules. 

 

WARNING: 

FOR  SAFE  USE  OF  THIS  FAN  AN  ALL-POLE  DISCONNECTION 

MUST  BE  INCORPORATED  INTO  THE  FIXED  WIRING  IN 

ACCORDANCE WITH THE WIRING RULES. 

As outlined in clause 7.12.2 of AS/NZS 60335-1 for meeting the 

minimum electrical safety of this standard.   

Please note warranty will be void if installation is without an all-pole 

disconnection incorporated in the fixed wiring in accordance with the 

wiring rules. 

Example: If a fan is connected to a circuit that can be isolated via an 

all-pole safety switch at the switchboard, then this is considered to be 

an all-pole disconnection to the ceiling fan electrical circuit, meeting 

Summary of Contents for ROY1304WH-DC













Reviews: