RVM - 2XC433 Rear View Camera Kit
Ventra Technology Inc.
Covina, CA. USA
www.ventrainc.com
info@ventrainc.com
Tel: 888 4183833
Installation layout
VLCD-7 equipped with U-shape bracket which
may be flipped for either dash or ceiling mount.
Removable sunshade may be used as needed
Operation Guide:
1. VLCD-7 monitor supports dual video input. If only 1 camera is connected, that camera will be primary, regardless of which
input it is connected to
2. If connecting 2 cameras,
•
Input 2
= Primary Camera
•
Input 1
= Secondary Camera
3.
To switch camera view, Press for momentary view of the second camera,
Or
if the secondary camera was powered on / triggered
by a switch (i.e. turn signal). Monitor will auto revert back to the primary camera after approximately 5 seconds.
VLCD-7 Operation:
1.
Press SET key to Enter or Exit Menu
2.
Press
or
to navigate menu. Press
or
to change setting
EX4-CBL cable is not waterproof and
should not be exposed to direct
sunlight, rain or element.
Cable
should be placed in weatherproof
conduit or sleeve
Secure
cable
connection
by
applying heat shrink tube or
electrical
tape
to
minimize
movement
from
vehicle
vibration
