background image

Warranty - 30

LIMITED WARRANTY - VENTRAC COMMERCIAL EQUIPMENT

LIMITED WARRANTY - VENTRAC COMMERCIAL EQUIPMENT

WARRANTY

Venture Products, Inc., (henceforth referred to as V.P.I.) warrants on the terms and conditions herein, that it will repair, 

replace, or adjust any part manufactured by Venture Products Inc., and found by Venture Products, Inc., to be defective in 

material and/or workmanship during the applicable warranty term.
All Ventrac commercial equipment purchased and registered on or after January 1, 2019 will carry a 2-year commercial 

warranty. The warranty period begins on the date of the original customer purchase:

Ventrac Commercial Equipment

Warranty Term

2100 SSV & Attachments

2-year

3000 Series Tractors & Attachments

2-year

4000 Series Tractors & Attachments

2-year

All Ventrac add-on kits and accessories such as: 3-point hitch, 12V front & rear power outlets, foot pedal, dual wheel kit, etc., 

will be covered under the above warranty periods provided they are installed by an Authorized Ventrac Dealer. This warranty 

may be transferred and will carry the remainder of the warranty starting from the original purchase/registration date with the 

dealership and/or V.P.I. 
The engine warranty is covered by its respective engine manufacturer. Please refer to the engine manufacturer’s warranty 

statement that is included in the owner’s manual.
For warranty consideration on Ventrac commercial equipment, the equipment, including any defective part, must be 

returned to an Authorized Ventrac Dealer within the warranty period. The warranty shall extend to the cost to repair or 

replace (as determined by V.P.I.) the defective part. The expense of pickup and delivery of the equipment, the service call 

drive time or any transportation expense incurred for the warranty repair is the sole responsibility of the owner and is not 

covered under warranty by Ventrac and/or V.P.I. Ventrac and V.P.I.’s responsibility in respect to claims is limited to making 

the required repairs or replacements, and no claim of breach of warranty shall be cause for cancellation or rescission of the 

contract of sale of any Ventrac equipment. Proof of purchase may be required by the dealer to substantiate any warranty 

claim. Only warranty work performed and submitted by an Authorized Ventrac Dealer may be eligible for warranty credit.
This warranty extends only to Ventrac commercial equipment operated under normal conditions and properly serviced 

and maintained. The warranty expressly does NOT cover: (a) any defects, damage or deterioration due to normal use, wear 

and tear, or exposure; (b) normal maintenance services, such as cleaning, lubrication, oil change; (c) replacement of service 

items, such as oil, lubricants, spark plugs, belts, rubber hoses, bearings or other items subject to normal service replacement; 

(d) damage or defects arising out of, or relating to abuse, misuse, neglect, alteration, negligence or accident; (e) repair or 

replacement arising from operation of, or use of the equipment which is not in accordance with the operating instructions 

as specified in the operator’s manual or other operational instructions provided by V.P.I.; (f) repair or replacement arising 

as a result of any operation from Ventrac equipment that has been altered or modified so as to, in the determination of 

V.P.I., adversely affect the operation, performance or durability of the equipment or that has altered, modified or affected 

the equipment so as to change the intended use of the product; (g) repair or replacement necessitated by the use of 

parts, accessories or supplies, including gasoline, oil or lubricants, incompatible with the equipment or other than as 

recommended in the operator’s manual or other operational instructions provided by V.P.I.; (h) repairs or replacements 

Summary of Contents for 39.55144
































Reviews: