Introduction - 5
INTRODUCTION
INTRODUCTION
Product Description
The LM600 mower is designed for the sole purpose of finish mowing and is built to give you maximum
performance and productivity. A rugged all steel reinforced carrier frame incorporates a full length rear roller
that maximizes grass striping of this ground floating deck.
The LM600 features a 60 inch (152 cm) cutting width. Ventrac’s LAS (Linear Adjustment System) provides
cutting height selections from 1-1/2” (3.8 cm) and 3-3/4” (9.5 cm). A single handle with a slight outward
pull allows for a quick and easy change in cutting height selection. A slide release allows the handle to be
returned to deck level, preventing it from catching on low branches and shrubs.
With the removal of two pins beneath the cross frame, the deck can be easily tilted to a near vertical posi-
tion for cleaning, maintenance, or storage.
Why Do I Need an Operator’s Manual?
This manual has been created to help you gain the important knowledge of what is needed to safely
operate, maintain, and service your machine. It is divided into sections for convenient reference of the
appropriate section.
You must read and understand the operator’s manual for each piece of Ventrac equipment you own. Read-
ing the operator’s manual will help you become familiar with each specific piece of equipment. Under
-
standing the operator’s manual will help you, as well as others, avoid personal injury and/or damage to the
equipment. Keep this manual with the machine at all times. The manual should remain with the machine
even if it is sold. If this manual becomes damaged or unreadable, it should be replaced immediately. Con-
tact your local Ventrac dealer for a replacement.
When using a Ventrac attachment, be sure to read and follow the safety and operating instructions of both
the power unit and the attachment being used to ensure the safest operation possible.
The information in this manual provides the operator with the safest procedures to operate the machine
while getting the maximum use out of the unit. Failure to follow the safety precautions listed in this manual
may result in personal injury and/or damage to the equipment.
V
enture Products Inc. is pleased to provide you with your new
Ventrac mower! We hope that Ventrac equipment will provide
you with a ONE Tractor Solution.
