SERVICE
Service - 20
Lubrication
Always set the parking brake, shut off the power
unit engine, remove the ignition key, and ensure
all moving parts have stopped before checking
mower deck or blade condition, or attempting
any repair or adjustment.
Lubrication is required at the following locations.
Refer to the maintenance schedule for service
intervals and number of pumps of grease.
Grease points are shown on a decal located on the
under side of the deck shield.
Storage
Preparing the MC600 Mower for Storage
1. Clean the mower deck and frame.
2. Inspect for loose or missing hardware, damaged
components, or signs of wear.
3. Inspect hydraulic hoses and fi ttings (if equipped)
to ensure tight, leak free connections. Repair or
replace any damaged or worn components.
4. Inspect belts, spindles, and blades. Repair or
replace any damaged or worn components.
5. Apply grease to all grease points.
6. Wipe off all excess grease or oil.
Removing the MC600 Mower from Storage
Inspect, clean, and prepare the mower for use.
