INTRODUCTION
Introduction - 5
Product Description
The MJ840 is designed for the sole purpose of finish mowing. The MJ840 features an 83” (211 cm) cut
-
ting width with full rear rollers for even cutting and striping, rear discharge, and a flip-up deck design.
The MJ840 features three independently floating decks that follow the contour of the terrain with up to 40
degrees of motion for each side deck.
Why Do I Need an Operator’s Manual?
This manual has been created to help you gain the important knowledge of what is needed to safely oper-
ate, maintain, and service your machine. It is divided into sections for convenient reference of the appropri-
ate section.
You must read and understand the operator’s manual for each piece of Ventrac equipment you own. Read-
ing the operator’s manual will help you become familiar with each specific piece of equipment. Under
-
standing the operator’s manual will help you, as well as others, avoid personal injury and/or damage to the
equipment. Keep this manual with the machine at all times. The manual should remain with the machine
even if it is sold. If this manual becomes damaged or unreadable, it should be replaced immediately. Con-
tact your local Ventrac dealer for a replacement.
When using a Ventrac attachment, be sure to read and follow the safety and operating instructions of both
the power unit and the attachment being used to ensure the safest operation possible.
The information in this manual provides the operator with the safest procedures to operate the machine
while getting the maximum use out of the unit. Failure to follow the safety precautions listed in this manual
may result in personal injury and/or damage to the equipment.
INTRODUCTION
Accessories
Item Description
Part Num
ber
MJ840 Mulching Kit
70.8087
V
enture Products Inc. is pleased to provide you with your new
Ventrac contour mower! We hope that Ventrac equipment
will provide you with a ONE Tractor Solution.
Listed below are just some of the items that can provide you
versatility
as you use your MJ840
contour mower. Please visit
our web site, or contact your authorized Ventrac dealer for a
complete list of items available for your new contour mower.
