English
English
15
14
1. Let cool, unplug the power and remove the blending jar from the main body.
2. Rotate the lid clockwise to remove the lid from blending jar.
3. Rinse the steam basket, blending jar and lids under the faucet to get rid of any
food residue.
4. If necessary, remove the blade and rinse the parts.
5. If necessary, remove the blade seal from the blade assembly for cleaning.
6. Turn the water tank cover counter-clockwise to remove it from the water tank.
7. Clean the water tank cover under the faucet.
8. If necessary, pour more water into the tank and rinse it. Repeat the procedure
as necessary until the tank is clean. Do not store water in the tank.
9. After cleaning, let dry main body and all parts before storing.
10. After drying, re-assemble all parts.
CLEANING
To ensure optimum performance, it is recommended that you deep clean the
product every 2-4 weeks. To reduce the accumulation of scale, it is recommended
that you use purified or filtered water for steaming.
Follow the maintenance instructions on the following page.
To avoid injury, use caution when handling blade assemblies, the blade is very sharp.
Maintenance
Cleaning
Food baskets and blending jars may be dyed by natural food coloring over time.
This is normal, all parts are still safe to use. If nesscessary, replacement parts are
available via our website at
www.ventray.com
Warning
•
Clean the product immediately after each use.
•
Do not immerse the main body and water tank in water or rinse under the faucet.
•
Do not use bleach or chemical disinfectants.
•
Do not use metal brush, abrasive cleaners or corrosive liquids (such as gasoline,
acetone or alcohol) to clean the product.
•
Do not allow parts to be soaked in water without rinsing.
•
After removing the blade seal for cleaning, be sure to replace the blade assembly.
Make sure the flat end of the blade seal faces up.
Do Not Wash In Dishwasher
1. Make sure the product is powered off.
2. Pour 100ml (1/2 cup) of hot water into the tank, soak for 10 minutes and then use a
soft brush for cleaning.
3. After cleaning, drain the water tank.
4. If accumulated scale is not completely dissolved, repeat the previous step.
5. Pour some of the water into the tank and rinse, repeat the procedure as necessary
until the tank is clean.
6. Rinse the tank cover thoroughly under the faucet.
7. Before using this product again, please add 180ml (3/4 cup) of water in the tank to
complete a steaming cycle.
1. Before storing this product, ensure water is emptied and heating plate is dry.
2. Before storing this product, ensure all components are clean and dry.
3. To prevent drop damage, assemble all parts correctly before storing.
Blade components disassembly and assembly diagram:
1) Hold the blending blade
by the plastic handle.
Mixing blade seal
Repositioning the mixing
blade until seamless
1) Place the seal
accordingly on to
the blade
2) Hold the plastic part
under the blade in one
hand and use the other
hand to counter-rotate
the blade off from the jar.
Disassembly
Diagram
Assembly
Diagram
2) Rotate plastic handle
clockwise to disassemble the
blade.
