7
www.vents-us.com
having unpacked the destratificator and prior to installation:
• Manually check the impeller for smooth rotation.
• Check the load-bearing structures at the installation site for adequate strength.
• Follow the safety regulations during the make-ready procedures and destratificator operation.
Mounting:
The destratificator is designed for installation in premises protected against atmospheric agents.
The unit is installed under the ceiling of the premises with the airflow nozzle down.
The destratificator is intended to be rigidly mounted to the load-bearing structure or suspended by means of the mounting kit (included
in the delivery set).
Mounting the destratificator on two cables allows the additional benefit of unit angle correction by adjusting the safety cable length.
Mounting sequence:
• Attach the destratificator by the bow bracket.
• Secure the destratificator to the threaded bar with 2 nuts (see Fig. 1).
• Avoid deformation of the destratificator elements during installation.
• Attach one end of the safety cable to the building structures.
• Attach the other end of the safety cable to the destratificator bracket (Fig. 2).
• Loosen the fastening bolts between the destratificator and the bracket, turn the destratificator and direct its nozzle toward the
intended air supply area (see Fig. 3).
• Tighten the bolts between the casing and the bracket.
reaD the user's ManuaL BeFOre instaLLinG the unit.
WhiLe instaLLinG the unit ensure cOnVenient access FOr suBseQuent
Maintenance anD repair.
MOuntinG anD set-up
1)
2)
3)
