background image

Bucket Fan (Whisper)

4

www.vents-us.com

naMe

nuMBer

Destratificator

1 item

Mounting kit

1 item

Cable with a threaded tip

3 m

Fastening kit

1 item

Safety kit

1 item

Cable with a loop

3 m

User's manual

1 item

Packing box

1 item

Power cord (optional)

1 item

Bucket Fan 420 r

power cord

_ — not included in the delivery set

R — power cord

Destratificator airflow [cFM]

420, 1055, 1460

unit designation

Bucket Fan — destratificator
Bucket Fan Whisper — destratificator in the noise-insulated casing

purpOse 

A destratificator is a device intended to minimize the heat loss by cancelling the temperature differential on the premises.
Destratificators are essential elements of energy-saving solutions for buildings and premises.
Such units are used to force the warm air accumulated under the ceiling as a result of stratification towards the lower part of the space.
By ensuring an even temperature in the entire space a destratificator helps to reduce the heating costs.
In the warm season destratificators are used to supply fresh air into a specific zone thus creating a favorable microclimate in the ventilated 
area. 
The destratificator is designed for continuous operation without disconnection from power mains.
Transported air must not contain any flammable or explosive mixtures, evaporation of chemicals, sticky substances, fibrous materials, 
coarse dust, soot and oil particles or environments favourable for the formation of hazardous substances (toxic substances, dust, 
pathogenic germs).

DO nOt instaLL in a cOOkinG area

FOr interiOr use OnLY

nOt suitaBLe FOr use With sOLiD-state speeD cOntrOLs

MOtOr is therMaLLY prOtecteD

DeLiVerY set

DesiGnatiOn keY

Summary of Contents for BUCKET FAN 1055













Reviews: