9
www.ventilation-system.com
UNIT START
When the unit is connected to power mains the controller loads and goes to the main page.
If no action is taken in any menu within 5 minutes, the system will reload to the main page.
MAIN PAGE
The main page opens after confirmation of the unit switching on.
Press
for accessing the setup menu.
Press
to navigate between the entries of the main page.
Use the buttons
and
to edit the main menu entries.
Current room temperature/supply air temperature
Current date
Timer mode
Scheduled operation mode
Current time
Unit operation modes
(Auto, Vent, Heating
(applicable for the models with heating))
Fan speed
Temperature setpoint
— fans are off
— speed I
— speed II
— speed III
Information field
%RH : humidity set point value is exceeded
СО
2
: permissible СО
2
concentration is exceeded
Information field
BYPASS:
bypass operation
RECOVERY:
heat exchanger operation
Alarm/Warning
SETUP MENU
Press
for accessing the setup menu from the main menu. The setup menu contains the general user parameters for unit operation
setup. Use
and
to navigate between the menu entries.
Press
to select an entry in the setup menu.
Press
to return to the main menu.
