background image

NOTE!  

With the purpose of performing warranty servicing please submit the user's manual or other 

relevant substituting document and the payment document as an evidence of the purchase with indication 
of the sale date. The product model shall comply with that one specified in the user's manual or other 
relevant substituting document. With the purpose of performing warranty servicing please contact your 
Seller. If warranty servicing on the spot proves impossible, you will be provided with the necessary 
information regarding rendering of this service.

Manufacturer's warranty shall not apply in the following cases:

- in case the customer fails to provide the product in complete according to the package contents specified 
in the user's manual or other relevant substituting document, including any components disassembled by 
the customer; 
- in case of incompliance of the model or marking of the product with data specified on the product 
packaging and in the user's manual or other relevant substituting document;
- in case of non-timely technical maintenance of the product by the customer (dust, mud, oil condensate, 
foreign particles);
- in case of causing external damage to the product by the customer ('damage' shall not apply to external 
changes of the product required for the product mounting);
- in case of altering the product design or further reworking of the product;  
- in case of replacing and using parts, units and components of the product not prescribed by the 
manufacturing company; 
- in case of other use of the product other than intended use;
- in case of the customer's violating product operation rules; 
- in case of connecting the product to electric mains of voltage exceeding voltage value specified in the 
user's manual;
- in case of step voltage that resulted in the product failure;
- in case of the customer's performing unauthorised repair of the product;
- in case of performing repair of the product by third persons unauthorized by the manufacturing company;
- in case of warranty period (service life) expiry;
- in case of the customer's violating transportation rules assuring prevention of damaging and/or 
destruction of the product;
- in case of the customer's violating product storage rules;

7

EN 

Summary of Contents for VENTS VK

















Reviews: