3
•
Read the user’s manual carefully prior to the operation and installation of the heat recovery air handling unit, hereinafter the unit.
•
Installation and operation of the unit shall be performed in accordance with the present user’s manual as well as the provisions of all
the applicable local and national construction, electrical and technical codes and standards.
•
The warnings contained in the user’s manual must be considered most seriously since they contain vital personal safety information.
•
Failure to follow the safety regulations may result in an injury or unit damage.
•
Read the manual carefully and keep it as long as you use the unit.
•
While transferring the unit control the user’s manual must be turned over to the receiving operator.
Symbol legend used in the manual:
UNIT MOUNTING SAFETY PRECAUTIONS
WARNING!
DO NOT!
The unit must be disconnected from the power
supply prior to every installation or repair
operation.
The unit must not be operated outside the
temperature range stated in the user's manual or
in aggressive or explosive environments.
Do not position any heating devices or other
equipment in close proximity to the unit power
cord.
Do not use damaged equipment or conductors
to connect the unit to power mains.
While installing the unit follow the safety
regulations specific to the use of electric tools.
Unpack the unit with care.
Do not change the power cord length at your
own discretion.
Do not bend the power cord.
Avoid damaging the power cord.
Use the unit only as intended by the
manufacturer.
SAFETY REQUIREMENTS
