5
INTRODUCTION
The user’s manual consisting of the technical details, operating instructions and technical specification applies to the installation and
mounting of the heat recovery air handling unit VENTS VUT 2000-3000 PW EC, hereinafter referred to as «the unit».
PURPOSE
THE UNIT MAY NOT bE OPERATED bY CHILDREN OR PERSONS WITH REDUCED PHYSICAL, MENTAL
OR SENSORY CAPACITIES, OR LACkING THE APPROPRIATE TRAINING.
THE UNIT MUST bE INSTALLED AND CONNECTED ONLY bY PROPERLY QUALIFIED PERSONNEL
AFTER THE APPROPRIATE bRIEFING.
THE CHOICE OF UNIT INSTALLATION LOCATION MUST PREVENT UNAUTHORIzED ACCESS bY
UNATTENDED CHILDREN.
DELIVERY SET
Name
Number
Unit
1 item
User's manual
1 item
Control panel
1 item
Packing box
1 item
Modification
L - left-handed modification
R - right-handed modification
Motor type
EC - electronically commutated motors
Heater type
W - water heater
Unit type
VUT - ventilation with heat recovery
Mounting method
P — suspended mounting
Air capacity [m3/h]
Control panel
__ — PU SENS 01 with a sensor display
А7 — PU JK 01 with an LCD display
VUT ХХХ PB ЕС - Х - X
DESIGNATION kEY
The unit with a heat exchanger and a water heater is designed to save heat energy by means of heat recovery and is one of the energy
saving components used in the buildings and premises. The unit is a component part and is not designed for independent operation.
The unit is designed to provide permanent controlled air exchange by means of mechanical ventilation in houses, offices, hotels, cafés,
meeting halls and other mechanically ventilated premises as well as utilization of extract air heat energy to warm up supply purified air.
The unit is designed for suspended mounting.
The unit is rated for continuous operation.
Transported air must not contain any flammable or explosive mixtures, evaporation of chemicals, sticky substances, fibrous materials,
coarse dust, soot and oil particles or environments favourable for the formation of hazardous substances (toxic substances, dust, pathogenic
germs).
