background image

4

VUTR 250/350/650 P/P2/PE/P2E EC 

www.ventilation-system.com

DELIVERY SET

DESIGNATION KEY

THE UNIT SHOULD NOT BE OPERATED BY CHILDREN OR PERSONS WITH REDUCED 

PHYSICAL, MENTAL, OR SENSORY CAPACITIES, OR THOSE WITHOUT 

THE APPROPRIATE TRAINING. 

THE UNIT MUST BE INSTALLED AND CONNECTED ONLY BY PROPERLY QUALIFIED 

PERSONNEL AFTER THE APPROPRIATE BRIEFING.

THE CHOICE OF UNIT INSTALLATION LOCATION MUST PREVENT UNAUTHORIZED 

ACCESS BY UNATTENDED CHILDREN.

VUTR 250 P 2 E EC

L

A17

Control

A17 – th-Tune control panel with an LCD display
A18 – pGD1 control panel with an LCD display

Modification

R – right-handed modification
L – left-handed modification

Motor type

EC – electronically commutated

Electric heater

_– without an electric heater
E – with an electric heater

Casing type

_ – standard, insulation thickness – 40 mm
2 – low-profile, insulation thickness – 20 mm

Mounting method

P – suspended mounting

Rated air flow [m

3

/h]

Series of units

VUTR – heat recovery air handling unit with a rotary heat exchanger

PURPOSE

The unit is designed to ensure continuous mechanical air exchange in houses, offices, hotels, cafes, conference halls, and other utility 
and public spaces as well as to recover the heat energy contained in the air extracted from the premises to warm up the filtered stream 
of intake air.
The unit is not intended for organizing ventilation in swimming pools, saunas, greenhouses, summer gardens, and other spaces with 
high humidity.
Due to the ability to save heating energy by means of energy recovery, the unit is an important element of energy-efficient premises. 
The unit is a component part and is not designed for stand-alone operation. 
It is rated for continuous operation.
Transported air must not contain any flammable or explosive mixtures, evaporation of chemicals, sticky substances, fibrous materials, 
coarse dust, soot and oil particles or environments favourable for the formation of hazardous substances (toxic substances, dust, 
pathogenic germs). 

Name 

Number

Air handling unit

1 pc.

User’s manual 

1 pc.

Control panel

1 pc.

Installation kit

1 pc.

Packing box

1 pc.

Summary of Contents for VUTR 250 P EC





















Reviews: