REGISTRATION FOR ADDITIONAL HANDSET
19
The Base allows registering max. 4 handsets.
The additional handset can be registered into Base as 3rd handset (H3) or 4th handset
(H4).
• In Base side:
– Press and hold the page button in base for 5 seconds until base LED flashing.
– Release the PAGE button after LED completely turn off from flashing.
– Then, base is now in register mode.
• In Handset side:
– Press scroll keys
6
/
5
to select “ADVANCED” and press “ “ button to confirm.
– “REGISTER” will be displayed on LCD.
– Press YES to confirm to entering to register mode.
– “ENTER PIN” will also display on LCD when entering to register mode.
– Press “4321” for the PIN entry, then registration has been starting.
– The antenna icon on LCD will flash.
Once the registration has been succeeded, Antenna icon on handset LCD will steady.
The handset ID no. will also be displayed below battery icons. (e.g. H3).
Note : Please try to repeat the same procedure as above for registration again in case
the 1st registration fails. (ie. Completion time of a succeeded registration should
be within 10 sec)
Registration is only needed for additional handset that was brought separately.
The original handsets (H1 & H2) are already registered into base by manufac-
turer.
*
9025_ib_us2.p65
11/21/02, 12:11 PM
20
