background image

EN

EN - 1

Safety PrecautionS

* See MarKinG on rear of ProDuct *

WarninG:

• TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE 

THE UNIT TO RAIN OR MOISTURE.

•  TO  AVOID  ELECTRICAL  SHOCK,  DO  NOT  OPEN  THE 

CABINET. REFER SERVICING TO QUALIFIED PERSONNEL 

ONLY.

•  THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING 

OR SPLASHING AND THAT NO OBJECTS FILLED WITH 

LIQUID,  SUCH  AS  VASES,  SHALL  BE  PLACED  ON  THE 

APPARATUS.

fcc StateMentS

This  device  complies  with  Part  15  of  the  FCC  Rules. 

Operation  is  subject  to  the  following  two  conditions: 

(1)  This  device  may  not  cause  harmful  interference,  and 

(2)  This  device  must  accept  any  interference  received, 

including  interference  that  may  cause  undesired 

operation.

This  equipment  has  been  tested  and  found  to  comply 

with the limits for a Class B digital device, pursuant to Part 

15 of the FCC Rules. These limits are designed to provide 

reasonable  protection  against  harmful  interference  in 

a  residential  installation.  This  equipment  generates, 

uses and can radiate radio frequency energy and, if not 

installed  and  used  in  accordance  with  the  instructions, 

may cause harmful interference to radio communications. 

However,  there  is  no  guarantee  that  interference  will 

not  occur  in  a  particular  installation.  If  this  equipment 

does  cause  harmful  interference  to  radio  or  television 

reception,  which  can  be  determined  by  turning  the 

equipment  off  and  on,  the  user  is  encouraged  to  try  to 

correct the interference by one or more of the following 

measures:

- Reorient or relocate the receiving antenna.

- Increase  the  separation  between  the  equipment  and 

receiver.

- Connect  the  equipment  into  an  outlet  on  a  circuit 

different from that to which the receiver is connected.

- Consult  the  dealer  or  an  experienced  radio/TV 

technician for help.

WarninG:

  Changes  or  modifications  not  expressly 

approved by the party responsible for compliance could 

void the user’s authority to operate the equipment. 

WarninG: SHocK HaZarD-Do not oPen

aVertiSSeMent: riSQue De cHoc ÉLectriQue-ne PaS ouVrir

The  lightning  flash  with  arrowhead  symbol, 

within  an  equilateral  triangle,  is  intended  to 

alert  the  user  to  the  presence  of  uninsulated 

“dangerous voltage” within the product’s enclosure that 

may  be  of  sufficient  magnitude  to  constitute  a  risk  of 

electric shock to persons.

The  exclamation  point  within  an  equilateral 

triangle  is  intended  to  alert  the  user  to 

the  presence  of  important  operating  and 

maintenance  (servicing)  instructions  in  the  literature 

accompanying the appliance.

Warnings:

•  The AC power plug is used as disconnect device and 

it  should  remain  readily  operable  during  intended 

used.  In  order  to  disconnect  the  apparatus  from 

the  mains  completely,  the  AC  power  plug  should 

be  disconnected  from  the  mains  socket  outlet 

completely.

•   The mains plug of apparatus should not be obstructed 

OR should be easily accessed during intended use.

•   Minimum  10  cm  (4  inches)  distances  around  the 

apparatus for sufficient ventilations.

•   The ventilation should not be impeded by covering the 

ventilation  openings  with  items  such  as  newspaper, 

table-cloths, curtains, etc.

•   No naked flame sources such as lighted candles should 

be placed on the apparatus.

On Safety

As  the  laser  beam  used  in  this  compact  disc  player  could 

be harmful to the eyes, do not attempt to disassemble the 

casing. Refer servicing to qualified personnel only.

•   Do not put any foreign objects in the disc compartment. 

If  you  do  so,  the  laser  beam  interlock  may  be  defeated 

allowing the laser to remain on when the lid is opened.

•   Should any objects or liquids fall into the unit, disconnect 

the power supply and have the unit checked by qualified 

personnel before any further operation.

On Operation

Since the CD system offers a wide dynamic range, the peaks 

of the high level inputs are recorded with high fidelity, and 

the noise level is very low. Do not turn up the volume while 

listening to a part of the disc with no audio signals or very 

low level inputs. If you do so, the speakers may be damaged 

when the peak level of the sound is played. The lens of the 

laser should be kept clean. Do not touch the lens. If you do 

so, the lens may be damaged and the unit will not operate 

correctly.

CAUTION

INVISIBLE LASER RADIATION

WHEN OPEN AND INTERLOCKS DEFEATED.

AVOID EXPOSURE TO BEAM.

cLaSS 1 LaSer 

ProDuct

This product contains a low 

power laser device.

Double insulation when servicing 

use only identical replacement parts.

On Use

Never use the unit where it would be subject to:

- Heat sources such as radiators or air ducts.

- Direct sunlight.

- Excessive dust.

- Moisture or rain.

- Mechanical vibration or shock.

- Uneven surface.

•  Do not place any heavy objects on top of the unit.

•  When the unit is used with an AC power plug, do not 

wrap the unit in a cloth, blanket, etc. If you do so, the 

temperature  inside  and  outside  the  unit  may  rise 

considerably, resulting in malfunctioning of the unit.

BWA17AA005_IB_r.indd   1

2017/1/17   14:42:05

Summary of Contents for CD6698BL











Reviews: