background image

EN

EN - 2

Safety PrecautionS

1.  Read these instructions.

2.  Keep these instructions.

3.  Heed all warnings.

4.  Follow all instructions.

5.  Do not use this apparatus near water.

6.  Clean only with dry cloth.

7.  Do  not  block  any  ventilation  openings.  Install  in 

accordance with the manufacturer’s instructions.

8.  Do not install near any heat sources such as radiators, 

heat  registers,  stoves,  or  other  apparatus  (including 

amplifiers) that produce heat.

9.  Do  not  defeat  the  safety  purpose  of  the  polarized 

or  grounding-type  plug.    A  polarized  plug  has  two 

blades  with  one  wider  than  the  other.  A  grounding 

type  plug  has  two  blades  and  a  third  grounding 

prong. The wide blade or the third prong are provided 

for your safety. If the provided plug does not fit into 

your outlet, consult an electrician for replacement of 

the obsolete outlet.

10. Protect  the  power  plug  from  being  walked  on 

or  pinched  particularly  at  plugs,  convenience 

receptacles, and the point where they exit from the 

apparatus.

11.  Only  use  attachments/accessories  specified  by  the 

manufacturer.

Portable 

cart

 

Warning

iMPortant Safety inStructionS

12. Use only with a cart, stand, tripod, bracket, 

or  table  specified  by  the  manufacturer, 

or  sold  with  the  apparatus.  When  a  cart  is 

used,  use  caution  when  moving  the  cart/

apparatus combination to avoid injury from 

tip-over.

13. Unplug  this  apparatus  during  lightening  storms  or 

when unused for a long period of time.

14. Refer  all  servicing  to  qualified  service  personnel. 

Servicing  is  required  when  the  apparatus  has  been 

damaged in any way, such as the power-supply cord 

or  plug  is  damaged,  liquid  has  spilled  or  objects 

have  fallen  into  the  apparatus,  the  apparatus  has 

been exposed to rain or moisture, does not operate 

normally, or has been dropped.

•  If  the  unit  is  brought  directly  from  a  cold  to  a  warm 

location, or is placed in a very damp room, the moisture 

may condense on the lens inside the unit. Should this 

occur, the unit will not operate. In this case, remove the 

disc and leave the unit in a warm place for several hours 

until the moisture evaporates.

•  For  the  unit  to  operate  at  its  best,  it  should  not  be 

subject to temperatures below 41°F (5°C) or above 95°F 

(35°C).

On Use

Never use the unit where it would be subject to:

- Heat sources such as radiators or air ducts.

- Direct sunlight.

- Excessive dust.

- Moisture or rain.

- Mechanical vibration or shock.

- Uneven surface.

•  Do not place any heavy objects on top of the unit.

•  When the unit is used with an AC power plug, do not 

wrap the unit in a cloth, blanket, etc. If you do so, the 

temperature  inside  and  outside  the  unit  may  rise 

considerably, resulting in malfunctioning of the unit.

•  If  the  unit  is  brought  directly  from  a  cold  to  a  warm 

location, or is placed in a very damp room, the moisture 

may condense on the lens inside the unit. Should this 

occur, the unit will not operate. In this case, remove the 

disc and leave the unit in a warm place for several hours 

until the moisture evaporates.

•  For  the  unit  to  operate  at  its  best,  it  should  not  be 

subject to temperatures below 41°F (5°C) or above 95°F 

(35°C).

Additional safety information

•  Apparatus shall not be exposed to dripping or splashing 

and no objects filled with liquids, such as vases, shall be 

placed on the apparatus.

•  Always  leave  sufficient  space  around  the  product  for 

ventilation. Do not place product in or on a bed, rug, 

in  a  bookcase  or  cabinet  that  may  prevent  air  flow 

through vent openings.

•  Do not place lighted candles, cigarettes, cigars, etc. on 

the product.

•  Connect  power  plug  only  to  AC  power  source  as 

marked on the product.

•   Care  should  be  taken  so  that  objects  do  not  fall  into  the 

product.

•  Do  not  attempt  to  disassemble  the  cabinet.  This 

product  does  not  contain  customer  serviceable 

components.

BWA17AA005_IB_r.indd   2

2017/1/17   14:42:07

Summary of Contents for CD6698BL











Reviews: