Venturer KLV39082, Owner'S Manual

- 16 -

This owner’s manual explains the basic instructions of this unit. Some DVDs are produced in
a manner that allows specific or limited operation during playback. Such as, the unit may not
respond to all operating commands. This is not a defect in the unit. Refer to the instruction
notes of discs.

“ 

” may appear on the screen during operation.  A “ 

” means that the desired operation is not

permitted by the unit or disc.

Playing a Disc

1. Press the   ON/OFF button to turn on the unit.
2. Press the DVD/TV/RADIO button (the FUNCTION button on the remote) to select DVD mode.

See  CUSTOMIZING THE FUNCTION SETTINGS (page 22 to 23) before proceeding to step 3.

3. Press the    OPEN/CLOSE button. The disc tray opens.
4. Place a disc onto the disc tray with the label side up.
5. Press the    OPEN/CLOSE button. The disc tray closes.

It takes a short while for your unit to load the disc. After loading, the unit will automatically either bring
you to the main menu of the DVD or start playback of the disc.

6. If the unit does not automatically start playing the DVD, press the   PLAY button.

Pausing Playback (Still Mode)

Press the   PAUSE button on the remote. To resume normal playback, press the   PLAY button.
Each time you press the   PAUSE button, the picture advances one frame on DVD.

Stopping Playback

Press the    button at the location where you want to interrupt playback. To resume playback at the
position where the disc was stopped, press the   PLAY button.

If you press the   button twice, the unit’s memory will be cleared and pressing the   PLAY button will reset
the disc to the beginning.

Skipping to a Different Chapter/Track

•

Press the 

button repeatedly to skip to the start of the current or previous chapter/track.

•

Press the 

 button to skip to the next chapter/track.

•

For an audio CD, use the number buttons (remote control only) to go directly to that track number.

Fast Forward/Fast Reverse

1. Press the TUNING 

 or 

 TUNING button on the remote control when a disc is playing.

• The disc begins fast scan at x2 speed.
• Four speeds are available. Each time the TUNING 

 or 

 TUNING button is pressed, the speed

of fast scan changes in the following sequence:

PLAYING A DISC

2. Press the    PLAY button when you have reached the desired point to resume playback at normal

speed.

Notes:
• The DVD player mutes sound during reverse and forward scan of DVD video discs.
• The fast playback speed may differ depending on the disc.

• When  MUTE is pressed, the sound is mute and the “

L O

”

indicator always blinks on the LCD display until MUTE is
pressed again or VOL is pressed.