SYMPTOM
CAUSE (AND REMEDY)
Material: 80g White Woodfree Paper
Print: Black Color
Size: 210 x 148 mm
(*Print black text on white background)
<PAGE 30>
21
0 m
m
148 mm
TROUBLE SHOOTING GUIDE
30
No power.
The remote does not function.
No sound or only a very low-
level sound is heard.
No picture
The picture is not clear.
Severe hum or noise is heard.
The disc does not play.
Check that the AC power cord is connected.
The region number of the disc does not match the region number
of this unit.
The function is not set to DVD mode.
Clean the disc.
The disc is scratched.
Check that the speakers and equipment are connected securely.
The plugs and jacks are dirty. Wipe them with a cloth slightly
moistened with alcohol.
Clean the disc.
Vibrations from the speakers are affecting the unit.
There is no disc inside ("No Disc" appears on the screen).
Insert the disc correctly with the playback side facing inward.
Clean the disc.
A non-NTSC disc has been inserted. The unit and disc region
number are incompatible.
Condensation may have formed inside the unit due to a sudden
change in temperature. Wait about an hour for it to clear and
try again.
Remove any obstacles between the remote and the unit.
Use the remote near the unit.
Point the remote at the remote sensor on the unit.
Replace all the batteries in the remote with new ones.
Ensure speakers and equipment are connected securely.
Make sure that you've selected DVD mode.
The system is in pause mode or in Slow-motion Play mode.
Press the
PLAY
button to return to normal play mode.
Fast forward or fast reverse is performed. Press the
PLAY
button to return to normal play mode.
Make sure that AUDIO / VIDEO output connections are correct.
Adjust the speakers volume.
The DTS DVD disc cannot be decoded to have speaker output.
This unit is too hot, shut off the unit for 30 minutes to cool
down.
Summary of Contents for MVS6950
Page 1: ......
