E
13
TV CHANNEL SETTING
1. Press the
MENU
button.
2. Use
the
or button to select TV CHANNEL
SETTING.
3. Use
the
or button to select the options
(Antenna / Auto Scan / Auto Scan Add CH
/ Channel Skip / Channel No. / Channel
Label)
.
4. Use
the
or button to make adjustment.
The screen will change to your selected mode
immediately. Press the
MENU
button to return
to the previous menu.
5. Repeat steps 2 to 4 to adjust other options.
6. To exit the TV SETUP MENU and return to the
normal screen, press the
MENU
button on the
remote control.
NOTE
Channel No. : 2-69 Channel for Air, 1-135
Channel for CATV.
TV SETUP
Channel Label
:You may edit one label for each channel.
1. Select the Channel Label item and press the
button to go into the
channel label edit screen.
2. Use the or button to enter the number or letter.
3. Use the or button to move and edit for the next character.
4. After editting, press the
DISPLAY
button and the Channel & Channel
Label will be shown on the screen.
Antenna
:
Select “CATV” to receive cable signal. Select
“AIR” to receive over-the-air signal..
Auto Scan
:
Automatically search all channels for those with
adequate signal strength.
Auto Scan Add CH
: The stored channels can not be cleared and the
Auto Scan Channels will be added.
If you has selected CATV in TV CHANNEL
SETTING, then you can select Cable System
(AUTO / STD / HRC / IRC) in the sub menu as
the picture shown.
Channel Skip
:
You may switch ON/OFF the skip function of each
stored channel by selecting the channel with /
button (and using / button to select page
if the amount of stored channels in more than 1
page), and followed with pressing the
ENTER
button.
