background image

E - 24

TV SETUP

Antenna

: Air (over-the-air broadcasts, Ch 2-69) or CATV (cable/satellite

broadcasts, CH 1-135) mode is available.

Auto Scan

: Search for usable stations and store them in memory.

Auto Scan Add CH

: Search for more usable stations and add them in memory. The stations

stored before are still kept.

Channel Skip

: Skip weak channels and the channels you do not like.

Channel No.

: Select a different TV channel.

Channel Label

: Display and edit the channel label.

DTV Signal

: Display the signal strength (for digital TV channels only).

TV MENU (For TV Mode Only)

1. Press the 

MENU

 button.

2. Use the   or   button to select 

TV, 

then press

the 

 button to enter the TV settings.

3. Use the 

 or 

 button to select the options

(

Antenna, Auto Scan, Auto Scan Add CH,

Channel Skip, Channel No., Channel Label 

or

DTV Signal

). Adjust them using the   or   button,

or press the 

 button to go into the detailed

settings.

4. Press the 

MENU

 button to return to the previous

menu.

5. Repeat steps 3 and 4 to adjust other options.
6. To exit the MAIN MENU and return to the normal screen, press the 

EXIT 

or 

MENU

 button

repeatedly.

Channel Skip

1. Use the 

 or 

 button to select a channel

(Press the 

 button to select the last channel

of the page; press again to go to the next
page. Press the 

 button to select the first

channel of the page; press again to return the
previous page).

2. Press the 

ENTER

 button to shift between On /

Off (Select On to skip the selected channel.
The channel will not appear when you press
the 

CH 

 

/

 CH 

 button).

Channel Label

You can edit a label for each channel.
1. Use the 

 or 

 button to select the number or

letter. Use the 

 or 

 button to move and edit

the next character. Press the 

ENTER

 button to

confirm.

2. After editing, the Channel and Channel Label

will be displayed on the screen when you press
the 

DISPLAY

 button.

PICTURE

AUDIO

TIME

SET UP PARENTAL

TV

TV

Antenna

Auto Scan

Auto Scan Add CH

Channel Skip

Channel No.

Channel Label

DTV Signal

Air

5-5

XXX

UP/DOWN

ADJUST "MENU":EXIT

Good

PICTURE

AUDIO

TIME

SET UP PARENTAL

TV

TV

EDIT

SELECT "MENU":EXIT

X

PICTURE

AUDIO

TIME

SET UP PARENTAL

TV

TV

"MENU":EXIT

"ENTER":SELECT

Skip

On

On

Off

Off

Off

On

Off

No.

3

2

4

5

5-1

6

7

Program Name

XXXX

XXX

XX

XX

XXXX

XXXXX

XXXX

NEXT

Summary of Contents for PLV21198




































Reviews: