E - 28
CONNECTING YOUR iPod
1. Ensure the appropriate iPod Dock Adaptor that was supplied
with your iPod is installed.
2. Insert your iPod into the connector in the dock.
3. Press the DVD/iPod button to select the iPod mode. Your
iPod will be connected automatically, and iPod Home menu
appears.
Note:
• Your iPod will charge automatically (until fully charged)
once it is connected, no matter whether the unit is in iPod
mode or not.
• Make sure the software of iPod is the latest.
Playing Music
1. In iPod Home menu, use the /
button to select Music and press the ENTER•OK
button.
2. Use the /
button to select from
Playlists, Artists, Albums, Songs, Genres or Composers. Press the
ENTER•OK
button to enter.
3. Use the /
button to navigate the iPod menu lists and select a song, press the ENTER•OK button to begin
playback. (You may also use the control wheel and keys on your iPod to operate it.)
• Press the
PAUSE button to pause, press the
PLAY button to resume.
• Press the
/
button to skip to the previous / next song.
iPod DOCK ADAPTOR
Before connecting your iPod, you need to install the appropriate iPod Dock Adaptor(supplied with the
iPod) in the dock of the unit.
INSTALLING THE iPod DOCK ADAPTOR
1. Open the iPod docking door.
2. Insert your iPod Dock Adaptor into the dock until it sits
firmly in place.
REMOVING THE iPod DOCK ADAPTOR
1. Remove the iPod Dock Adaptor as shown.
2. Replace it with another one you need.
IMPORTANT:
Before docking your iPod, MAKE SURE your iPod has the
latest FIRMWARE.
WARNING: To prevent damage to the unit and/or
your iPod, connect or remove your iPod when the unit is
powered off or the unit is not in iPod mode.
USING TO YOUR iPod