6
7
SPRING CLEAN!
It goes without saying you are going to want to enjoy your Verano® product(s) for as long as possible. Cleaning the
product will certainly contribute to a long life. That’s why we will provide you with a step-by-step plan to help you
with the cleaning.
WHAT WILL YOU NEED?
DRY LUBRICANT
LUKEWARM WATER
(MAX 350C)
CLEANING PRODUCT
WITH A LOW PH VALUE
(<7.5)
BRUSH/
VACUUM CLEANER
Tips
Take a quick look outside before you start cleaning. Is the sun shining brightly? Then
postpone your cleaning activities for a little while. Firstly, because the weather is far
too nice to be cleaning. And secondly, soapy water which dries too quickly can leave
marks on the fabric.
Verano® products require little maintenance and have an incredibly
long life. However, in the unlikely event of a product malfunction,
contact your Verano® partner immediately. Make sure you check the
following before you start cleaning your products:
Fabric
Aluminium profiles
Distortion of the product
Deviating sound when opening/closing
ALSO CHECK:
CHAMOIS
Lubricated parts
You can apply a dry lubri-
cant, such as silicon spray, to
the plastic guidance blocks,
rubbers and the aluminium
guidance profiles. Carefully re-
move any remnants of the dry
lubricant.
Cleaning the profiles
The profiles can be cleaned
with lukewarm water and a
cleaning product with a pH
value lower than 7.5. Avoid
using scouring pads and high
pressure equipment!
Rinse clean
Rinse the fabric clean with
lukewarm water.
Removing stains
Stains can be removed with
lukewarm water and a spe-
cially available cleaning agent.
Don’t use aggressive cleaning
agents, as this could potential-
ly affect the finish layer!
CLEANING
THE FABRIC
CLEANING
THE ALUMINIUM
Remove dirt
Remove loose dirt with a
brush or vacuum cleaner.
Remove any dirt
Remove any dust, branches
and leaves with a brush.
STEP
1
STEP
1
STEP
2
STEP
2
STEP
3
STEP
3
