I-Ga te 4000 P R O Ins tall ation
Inserti ng the Ca rds
02041802-05
Veraz Networks Inc. Proprietary
8-11
8.6. Inserting the I/O Cards
To insert the I/O cards:
1. Align the card with the slot appropriate for the functionality of the card (see
Figure 8-6).
2. Slide the card straight back until it stops. Do not force the card.
3. Press the card's PCB ejector into the closed (up) position to seat the card.
4. Confirm that the card is aligned flush with the other cards in the upper shelf.
5. Tighten the card's screws with a screwdriver until secure. Do not over-tighten.
Removing Card
1. Flip top and
bottom ejectors
outwards (open)
2. Slide out card
Inserting Card
1. Slide card back
into its slot as far
as possible.
2. Close top and
bottom ejectors
Figure
8-6: Removing/inserting an I/O card