What can MediaShare Wireless do for me?
The MediaShare Wireless creates its own wireless network and adds a USB port and Secure Digital card reader
function to your iOS or Android tablet or smartphone. Access to the storage devices is acheieved via an app installed
on your smartphone or tablet.
It allows you to transfer content from your smartphone or tablet to a removable storage medium such as a USB flash
drive, USB hard disc drive or SD Card. You can use this function to backup the camera roll folder of an iOS device
without using a computer.
Up to 5 users can simultaneously use the MediaShare Wireless accessing both USB and SD storage devices.
You can playback multimedia content from a USB flash drive, USB hard disc drive or SD Card on your tablet or
smartphone. (File support is dependent on the playback software and and hardware capabilities of your tablet or
smartphone.)
Files saved by one user can be accessed by all other users, allowing the MediaShare Wireless to act as a file transfer
hub between tablet and smartphone users.
The MediaShare Wireless can create a link to another wireless network to simultaneously access the internet and
content on USB and SD storage.
When not used as a wireless storage device the built in 3000mAh battery can be used as a backup power source for
your smartphone.
Basic Instructions for Use
1.
Charge your MediaShare Wireless. Connect your MediaShare Wireless micro USB port (8)via the supplied
micro USB cable to a USB port of a computer or USB power supply. When your MediaShare Wireless is fully
charged the Green Led (1) will stop flashing.
2.
Insert an SD card or connect a USB drive (flash or HDD) to the USB host port.
3.
Download and install the MediaShare Wireless app from your portable devices app store. Search for
“Verbatim MediaShare Wireless” app or use these direct links
Itunes :
https://itunes.apple.com/app/mediashare-wireless/id641926674?ign-mpt=uo%3D5
Android :
https://play.google.com/store/apps/details?id=verbatim.wd.activities&hl=en
4.
Power on your MediaShare Wireless by pressing on/off button. Blue WIFI led (2) will flash until wireless
broadcasting is established.
5.
Make sure that your portable device’s WIFI connection is enabled and connect to your MediaShare Wireless
wifi connection called “Verbatim-XXXX” where XXXX is the last 4 characters of the unique MAC (Media
Access Control) address code of your MediaShare Wireless, when prompted for wifi security key, enter the
password printed on the bottom of your MediaShare Wireless.
6.
Start the MediaShare Wireless app on your portable device.
7.
You will now be able to access content on the SD card or USB drive connected to your MediaShare Wireless
wirelessly.
8.
You can transfer content from your portable device to the SD card or USB drive connected to your
MediaShare Wireless (function dependent on app)
Please note that your MediaShare Wireless will temporarily utilise some available storage from your SD card or
connected USB drive as a swapfile.
