background image

 

Nov21 

Product Instructions

 

 

VERDE LED - RESIDENTIAL LIGHT CIVIC 

 

 

USER GUIDE:

 

The purpose of this user guide is to explain the necessary steps for the proper use of a LED Downlight and 
to  assure  peak  performance  of  this  product. 

It  is  intended  for  use  as  reference  by  a  fully  qualified 

electrician or technician.

 This document should never be considered a substitute for any provision of a 

regulation or state and/or local code. Please read this entire manual to fully understand and safely use this 
product. Specifications are subjected to change without notice. Please visit 

www.verdeenergygroup.com

 

for the most recent technical data. 

 

GETTING STARTED 

 

This guide contains important information about installing and operating your new LED Downlight safely 
and accurately.

 

 

Product description

:

 

MODEL

 

Mounting

 

Pole Diameter

 

VER-CVL-15-730

 

On Pole-top

 

Ø76mm

 

VER-CVL-25-730

 

On Pole-top

 

Ø76mm

 

VER-CVL-40-730

 

On Pole-top

 

Ø76mm

 

VER-CVL-60-730

 

On Pole-top

 

Ø76mm

 

 

Declaration of the product:

 

Each package box includes LED Downlight 1pc, LED driver 1pc integrated in luminaire.

 

 

CAUTION:

 

1.

 

Risk of fire or electric shock. Ensure that the power supply is off when installation is carried out. 

 

2.

 

The light source of this luminaire shall be only replaced by the manufacturer or his service agent 
or a similar qualified person

 

3.

 

The control gear of this luminaire shall be only replaced by the manufacturer or his service agent 
or a similar qualified person

 

4.

 

Before installation the fully qualified installer must determine whether the power supply is in 
the electrical input range stated in the Product Parameters table (see below) of the luminaire.

 

5.

 

Do not remove the LED light or LED driver cover.

 

6.

 

Any constructive change of the luminaire or driver is not permitted.  

 

7.

 

Lamp suitable for 50Hz or 60Hz operation.

 

8.

 

The device should be installed and operated by a qualified electrician or technician in accordance 
with relevant local codes.  

 

9.

 

Do not use sharp tools near or on the surface of the device. 

 

10.

 

Lamp is suitable for dimming when operated with a dimmable driver. 

 

11.

 

Lamp is suitable for emergency operation when operated with an external emergency pack.

 

12.

 

Ingress grade IP66, IK09 Driver IP20. Lamp to be used in outdoor conditions.

 

13.

 

All VERDE products comply with surge immunity as specified by EN 61547:2009. However, the 
Verde Warranty also requires additional surge protective devices to be installed on-site against 
the effects caused by remote lightning strikes, inductive or capacitive coupling, and switching 
surge voltages. These are typically installed at the main distribution and sub-distribution panels 
and  are  to  be  maintained  and  operational  always.  Refer  to  industry  experts  such  as 
www.phoenixcontact.com for further surge protection advice

 

14.

 

This product contains a light source of energy efficiency class ‘’D’’

 

Summary of Contents for VER-CVL-15-730

Page 1: ...he control gear of this luminaire shall be only replaced by the manufacturer or his service agent or a similar qualified person 4 Before installation the fully qualified installer must determine whether the power supply is in the electrical input range stated in the Product Parameters table see below of the luminaire 5 Do not remove the LED light or LED driver cover 6 Any constructive change of th...

Page 2: ...to the installation maintenance and operation of the device lies with the buyer and handler of the device These parties may include but are not limited to the contractor installer purchaser owner and user of the product Consult Lighting Application Engineering services as needed Product parameters Model number Input Voltage Power Working Temperature C VER CVL 15 730 100 277 VAC 50 60Hz 12W 40 C 45...

Page 3: ...ch take note of the input voltages 1 Connect the power cord reserved for the luminaire and the power cord of the lamppost properly L brown to the fuse N blue to the neutral yellow green to ground The wiring should be waterproof 2 Insert the lamp lever arm into the lamp and rotate the lamp to the desired direction the arrow on the lamp marks the direction of light distribution 3 Please lock the thr...

Page 4: ...inaires be directly mounted on the surface of ordinary combustible materials Please do not cover the luminaries with any objects Do not use the product in a closed environment Only a professional can maintain luminaires non professionals should not do the maintenance The external wiring of this luminaire adopts a X type connection If the external flexible cable or wire of this luminaire is damaged...

Reviews: