40
EN
Troubleshooting guide
Fault
Possible cause
Remedy
Device does not start
Check the battery, if required, arrange repair by an
authorized electrician
On/Off switch faulty
Repair by an authorized Service Centre
Motor faulty
Repair by an authorized Service Center
Battery too cold/too warm
Warm up the battery/leave the battery to cool down
Gardening tool defective
Contact the Service Centre
Internal wiring of the gardening tool
defective
Device does not start
Contact the Service Centre
The tool works intermittently
The on/off switch is faulty
Contact the Service Centre
Heavy vibrations / loud noise Gardening tool defective
Contact the Service Centre
Gardening tool does not blow
Nozzle blocked
Clear nozzle
Gardening tool switches off
Switch gardening tool off and charge the battery if
the airflow speed reduce significantly
Motor stops during operation
Battery empty
Charge battery
Battery not inserted correctly
Re-insert battery
Battery faulty
Clean terminals, replace original battery
Decreased performance
Battery exhausted
Replace battery
Charge battery
Battery not fully charged
Original instructions