Timer Type
t5
On pressing the Timer key; 'Timer Type 5' starts the countdown immediately. On
completion of the countdown, the product continues to control as normal ('
End
' flashes
on the display).
3.5.6
The Timer Temperature Band
Timer type
t1
or
t4
starts the countdown when the setpoint temperature is reached. It
is possible to set the timer running before the setpoint is reached by adjustment of the
timer temperature band '
t.bnd
', e.g. '
t.bnd
' set to a value of 3 will result in the timer
starting to countdown 3°C before the temperature setpoint is reached. This is useful
when furnaces or ovens that take a long time to reach setpoint, are at a sufficiently high
temperature for a specific customer process to occur.
25
3.0 301 Controller
