3.0 301 Controller
3.5.4
Resetting the Timer
l
When the timer count has ended, or the timer is paused,
start at the Home Display.
l
Press and hold the Timer key for 1.5 seconds.
l
rSt
is displayed to indicate timer reset.
3.5.5
Timer Function Description
The 301 Controller has an in-built timer, which can be set to one of five types:
Timer Type
t1
On pressing the Timer key; 'Timer Type 1' waits for the setpoint to be reached, then
begins the countdown. On completion of the countdown, the product switches off power
to the elements ('
End
' flashes on the display).
Timer Type
t2
On pressing the Timer key; 'Timer Type 2' starts the countdown immediately. On
completion of the countdown, the product switches off power to the elements ('
End
'
flashes on the display).
Timer Type
t3
On pressing the Timer key; 'Timer Type 3' immediately switches the product heating off
and starts to countdown. On completion of the countdown, the furnace or oven switches
on the power to the elements. This can be used to delay the start of heating.
Timer Type
t4
On pressing the Timer key; 'Timer Type 4' waits for the setpoint to be reached, then
begins the countdown. On completion of the countdown, the product continues to
control as normal ('
End
' flashes on the display).
24
