Rev 1.1 Cod. 00.009.122
27
PARAMETERS:
mA Min
: minimum mA current value
% Min
: flowrate of the pump when the input exceeds mA Min
Dos.Min
: allows to choose if, when the input mA current is less than the minimum mA current, the pump must dose
[act]
at the
% Min
flowrate or it must not dose
[dea]
mA Max
: maximum mA current value
% Max
: flowrate of the pump when the input current is equal to mA Max
Dos.Max
: allows to choose if, when the input mA current is greater than mA Max, the pump must dose
[act]
at the
% Max
flowrate or it must not dose
[dea]
NB: WITH FACTORY
SETTINGS, WHEN IN THE
INPUT THERE IS A
CURRENT OF 4.0mA THE
PUMP DOES NOT DOSE;
WHEN IN THE INPUT
THERE IS A CURRENT OF
20mA THE PUMP DOSES
AT 100% OF THE
FLOWRATE.
